| Version 4 (modified by , 17 years ago) (diff) |
|---|
Basic C Plugin How-To
Introduction
This How-To document is designed to provide a basic overview of writing a plugin for Pidgin, Finch, and/or libpurple in our native language, C. We'll write a basic "Hello, World!" plugin. Let's dig in, shall we?
As we've already stated, C plugins are native plugins. They have complete access to all of the API provided by Pidgin, Finch, and libpurple. This means that a C plugin can do basically anything it wants to do. All our protocol plugins and our loader plugins (Mono, Perl, and Tcl) are written in C.
Getting Started
To develop a plugin, you need to have an installation of libpurple that includes development headers, at minimum. To write a plugin that includes features requiring Pidgin or Finch functionality, you will need to also have Pidgin or Finch installed, complete with development headers.
It will actually be easier for the first-time plugin author to install the development dependencies and then have a copy of the corresponding Pidgin source tarball. For example, if you're running 2.0.2 on a Debian Sid (unstable) or testing system, you would do the following:
# apt-get build-dep pidgin
Similarly, on a Fedora system, you would do this:
# yum install pidgin-dev
People using Windows should read the Building Windows Pidgin page on this wiki to set up the necessary build environment.
The command above for Debian systems will install only the build dependencies of Pidgin, Finch, and libpurple. The command shown for Fedora will install all of those, as well as the development headers for libpurple, Finch, and Pidgin.
Once you have installed these dependencies, download a source tarball. You will want to use the source tarball that matches the version of Pidgin you are running, as it's generally a good idea to compile against the same version you run your plugins with.
For the purposes of this How-To, we will assume the following:
- You understand the concept of
~being your home directory - You are working within the directory
~/development. - You are using Pidgin 2.0.2.
If you are using a different version of Pidgin, simply replace references to 2.0.2 with whichever version you are using. If you wish to use a path other than ~/development (for example, Windows users correctly following the instructions will have ~/win32-dev and their Pidgin tarball will be extracted in ~ to match), simply treat our references to ~/development as a reference to the directory in which you extract the tarball.
Now, extract the tarball:
~/development $ tar -jxvf pidgin-2.0.2.tar.bz2
Next, change to the pidgin-2.0.2 directory. If you are using Windows, run make -f Makefile.mingw to build Pidgin. If you are using another platform, run ./configure and then make after the configuration is complete. You may wish to customize the arguments to the configure script, which is beyond the scope of this document. If you are using Windows, DO NOT under any circumstances use the configure script! Any executables or .dll files derived from a Pidgin tree that has been configured via the configure script WILL NOT WORK outside of Cygwin, if they will build at all.
Now that everything is compiled, we can get to the real work of developing your first plugin, but first a point to be well aware of. ALL C plugins must define PURPLE_PLUGINS by using the #define preprocessor directive. This definition must occur before including any libpurple, Pidgin, or Finch header files. Failure to have #define PURPLE_PLUGINS in your source file leads to very strange errors that are difficult to diagnose. Just don't forget to do it!
Hello, World!
Every programming language's tutorial has its own Hello, World! first application. Why should our plugin tutorial be any different? Let's dig in. First, go to ~/development/pidgin-2.0.2/libpurple/plugins and create the file helloworld.c with your favorite editor. The contents of the file will be this:
#define PURPLE_PLUGINS #include <glib.h> #include "notify.h" #include "plugin.h" #include "version.h" static gboolean plugin_load(PurplePlugin *plugin) { purple_notify_message(plugin, PURPLE_NOTIFY_MSG_INFO, "Hello World!", "This is the Hello World! plugin :)", NULL, NULL, NULL); return TRUE; } static PurplePluginInfo info = { PURPLE_PLUGIN_MAGIC, PURPLE_MAJOR_VERSION, PURPLE_MINOR_VERSION, PURPLE_PLUGIN_STANDARD, NULL, 0, NULL, PURPLE_PRIORITY_DEFAULT, "core-hello_world", "Hello World!", "1.1", "Hello World Plugin", "Hello World Plugin", "My Name <email@helloworld.tld>", "http://helloworld.tld", plugin_load, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL }; static void init_plugin(PurplePlugin *plugin) { } PURPLE_INIT_PLUGIN(hello_world, init_plugin, info)
So, what does all this mean? Well, let's go through this with a line by line analysis. The #define PURPLE_PLUGINS is required, as we mentioned above.
Next, we include glib.h, the header for GLib. We do this mainly for the gboolean typedef and the other GLib wrappers for the standard C types. After this, we include notify.h, plugin.h, and version.h. The plugin.h header includes definitions that all plugins need, such as the type PurplePluginInfo and the macros PURPLE_PLUGIN_MAGIC and PURPLE_INIT_PLUGIN().
The version.h header defines PURPLE_MAJOR_VERSION and PURPLE_MINOR_VERSION. There's not much that you need to know about anything in version.h, except that they are required and will prevent your plugin from crashing Pidgin if it's probed by an older or newer Pidgin, such as 1.5.1 or 3.0.0 (which of course does not yet exist at the time of this writing), where things are different and your plugin doesn't know about the differences.
The notify.h header defines a bunch of notification functions. For the scope of this part of the tutorial, it's not important to know anything about the contents of the file. We'll use it for one function call to prove that our plugin works. Later sections of the tutorial will come back to the notify API and flesh it out a bit more for readers.
Moving on, the plugin_load function is defined. This is not a required function to implement, but if you choose to implement it, libpurple will call the function when the plugin is loaded. You can use it to initialize any global variables in your source file, to connect to signals, and so on. Here, we'll use it just to display a message by calling a function from notify.h.
Next in our source file we have the declaration and initialization of a global variable. We called this variable info, and it is of the type PurplePluginInfo. Every plugin is required to declare and initialize a variable of this type in order to tell libpurple about the plugin. This next code snippet is the exact same struct declaration and initialization from the snippet above, but with some comments included to explain the function of each member of the struct.
static PurplePluginInfo info = { PURPLE_PLUGIN_MAGIC, /* Plugin magic, this must always be PURPLE_PLUGIN_MAGIC.*/ PURPLE_MAJOR_VERSION, /* This is also defined in libpurple. It helps libpurple's plugin system determine which version of libpurple this plugin was compiled for, and whether loading it will cause problems. */ PURPLE_MINOR_VERSION, /* See previous */ PURPLE_PLUGIN_STANDARD, /* PurplePluginType: There are 4 different values for this field. The first is PURPLE_PLUGIN_UNKNOWN, which should not be used. The second is PURPLE_PLUGIN_STANDARD; this is the value most plugins will use. Next, we have PURPLE_PLUGIN_LOADER; this is the type you want to use if your plugin will make it possible to load non-native plugins. For example, the Perl and Tcl loader plugins are of this type. Last, we have PURPLE_PLUGIN_PROTOCOL. If your plugin is going to allow the user to connect to another network, this is the type you'd want to use. */ NULL, /* This field is the UI requirement. If you're writing a core plugin, this must be NULL and the plugin must not contain any UI code. If you're writing a Pidgin plugin, you need to use PIDGIN_PLUGIN_TYPE. If you are writing a Finch plugin, you would use FINCH_PLUGIN_TYPE.*/ 0, /* This field is for plugin flags. Currently, the only flag available to plugins is invisible (PURPLE_PLUGIN_FLAG_INVISIBLE). It causes the plugin NOT to appear in the list of plugins. */ NULL, /* This is a GList of plugin dependencies. In other words, it's a GList of plugin id's that your plugin depends on. Set this value to NULL no matter what. If your plugin has dependencies, set them at run-time in the plugin_init function. */ PURPLE_PRIORITY_DEFAULT,/* This is the priority libpurple will give your plugin. There are three possible values for this field, PURPLE_PRIORITY_DEFAULT, PURPLE_PRIORITY_HIGHEST, and PURPLE_PRIORITY_LOWEST. */ "core-hello_world", /* This is your plugin's id. There is a whole page dedicated to this in the Related Pages section of the API docs. */ "Hello World!", /* This is your plugin's name. This is what will be displayed for your plugin in the UI. */ "1.1", /* This is the version of your plugin. */ "Hello World Plugin", /* This is the summary of your plugin. It should be a short blurb. The UI determines where, if at all, to display this. */ "Hello World Plugin", /* This is the description of your plugin. It can be as long and as descriptive as you like. And like the summary, it's up to the UI where, if at all, to display this (and how much to display). */ "My Name <email@helloworld.tld>", /* This is where you can put your name and e-mail address. */ "http://helloworld.tld",/* This is the website for the plugin. This tells users where to find new versions, report bugs, etc. */ plugin_load, /* This is a pointer to a function for libpurple to call when it is loading the plugin. It should be of the type: gboolean plugin_load(PurplePlugin *plugin) Returning FALSE will stop the loading of the plugin. Anything else would evaluate as TRUE and the plugin will continue to load. */ NULL, /* Same as above except it is called when libpurple tries to unload your plugin. It should be of the type: gboolean plugin_unload(PurplePlugin *plugin) Returning TRUE will tell libpurple to continue unloading while FALSE will stop the unloading of your plugin. */ NULL, /* Similar to the two above members, except this is called when libpurple tries to destory the plugin. This is generally only called when for some reason or another the plugin fails to probe correctly. It should be of the type: void plugin_destroy(PurplePlugin *plugin) */ NULL, /* This is a pointer to a UI-specific struct. For a Pidgin plugin it will be a pointer to a PidginPluginUiInfo struct, for example. */ NULL, /* This is a pointer to either a PurplePluginLoaderInfo struct or a PurplePluginProtocolInfo struct, and is beyond the scope of this document. */ NULL, /* This is a pointer to a PurplePluginUiInfo struct. It is a core/ui split way for core plugins to have a UI configuration frame. You can find an example of this code in libpurple/plugins/pluginpref_example.c */ NULL, /* This is a function pointer where you can define "plugin actions". The UI controls how they're displayed. It should be of the type: GList *function_name(PurplePlugin *plugin, gpointer context) It must return a GList of PurplePluginActions. */ NULL, /* This is a pointer reserved for future use. We set it to NULL to indicate we don't need it. */ NULL, /* This is a pointer reserved for future use. We set it to NULL to indicate we don't need it. */ NULL, /* This is a pointer reserved for future use. We set it to NULL to indicate we don't need it. */ NULL /* This is a pointer reserved for future use. We set it to NULL to indicate we don't need it. */ };
Finally in our source file, we have the init_plugin function and the call to the macro PURPLE_INIT_PLUGIN. The init_plugin function is called whenever libpurple probes the plugin. Most plugins will add their prefs to the prefs tree here (more on prefs in another section of the tutorials), as well as do the necessary initialization for translation support (more on that in other documentation).
Every plugin MUST call the PURPLE_INIT_PLUGIN macro. The call to this macro tells libpurple some very basic things about your plugin, like what name to use if someone compiles your plugin statically into a binary, which function is the init_plugin function (because you can call it anything!), and the name of the PurplePluginInfo structure (which also can be called by any name you want). Libpurple reads this information when probing the plugin. If this call is missing, the plugin will not successfully probe and cannot ever load.
Compile, Install, and Load the Hello, World! Plugin
Now that we have a complete plugin source file, we need to compile it. From ~/development/pidgin-2.0.2/libpurple/plugins, run make helloworld.so (if using Windows, make -f Makefile.mingw helloworld.dll). If you copied and pasted the code correctly, this should compile without incident. You can move the resulting .so file to ~/.purple/plugins (move the resulting .dll file to %APPDATA%\.purple\plugins on Windows). Now when you open the Plugins dialog in Pidgin or Finch, the plugin should show up. When you load it you should see a message pop up.
Going Beyond Hello, World!
Consider C Plugins 101 complete. We have more to get to in this tutorial series. See the other documents listed on the C Plugin How-To.
